○ Valid GPS data are available with valid GPS signal reception - at least 3 satelites available (if
service is enabled)
○ Serve with Berlios daemon
The Berlios daemon will be started in the MG102 unit. With this setting the Show location will
work and information about position, altitude and number of available satellites in GPS Data
submenu will be available. The default TCP port of Berlios daemon is 2947.
Note
The GPS driven time synchronisation (NTP - menu SYSTEM-Time & Region) requires
running Berlios daemon on port 2947
Additional information about gpsd daemon you can find under http://gpsd.berlios.de or ht-
tp://www.catb.org/gpsd/.
The real time information in NMEA format you can obtain by connecting (e.g. via PuTTY) to the
MG102 address with the proper TCP port (2947 by defaults):
$GPGSV,3,1,11,02,32,260,38,04,22,217,35,05,29,305,39,07,75,142,35*77
$GPGSV,3,2,11,08,41,201,40,10,77,217,36,13,55,068,30,16,17,040,*78
59
© RACOM s.r.o. – MG102, M!DGE, GPRS/EDGE/UMTS routers
Configuration
Содержание Midge MG102
