RACOM Midge MG102, Руководство по эксплуатации

Страница: 60 / 122

$GPGSV,3,3,11,23,24,082,,26,00,265,,29,,,*7A
$GPGGA,081328.0,4934.105294,N,01604.635478,E,1,07,1.6,623.4,M,44.0,M,,*56
$PQXFI,081328.0,4934.105294,N,01604.635478,E,623.4,2.63,3.40,0.33*65
$GPVTG,26.9,T,26.9,M,0.0,N,0.0,K,A*23
$GPRMC,081328.0,A,4934.105294,N,01604.635478,E,0.0,26.9,250512,,,A*5B
$GPGSA,A,3,02,04,05,07,08,10,13,,,,,,3.2,1.6,2.8*31
$PSTIS,*61
○ Forward to remote host
The GPS data will be send as UDP payload NMEA sentences $GPRMC, $GPGSA, $GPGGA,
$GPVTG, $GPGSV and $PNMID will be used.
Destination address and UDP port has to be set up. The data will be send out in setted update
cycle [seconds].
○ Output to local COM port
MG102, M!DGE, GPRS/EDGE/UMTS routers – © RACOM s.r.o. 60
Configuration