RACOM Midge MG102, Руководство по эксплуатации

Страница: 26 / 122

Mobile
• Administration
After the configuration (e.g. setting the APN), the mobile connection is enabled here. We recommend
using the ´pernament´ option. The UMTS/GSM LED is blinking during the connection establishment
and goes on as soon as the connection is up. See the troubleshooting section and log files if the
connection does not come up.
Description Parameter
This can be permanent, dial on demand or disabled. The on demand
method waits for traffic coming from the LAN going to the WAN.
The permanent method keeps up the mobile interface. In case of link loss
the connection is reestablished.
Administrative connec-
tion status:
Number of redialing attempts before switching to the next profile. Redial attempts:
Time in minutes after that an idle connection will be disconnected when
working with ‘dial on demand’ Dial on demand idle
timeout:
Shows whether a connection is up or not.
Operational connection
status:
Choose mobile if M!DGE/MG102 is driving around. For stationary installa-
tion choose ‘stationary’ Application area:
The preferred service type can be set here. Service type:
IP address on mobile interface (ppp0) assigned by PPP server IP address:
Subnet mask on mobile interface (ppp0) assigned by PPP server Subnet mask:
• Configuration
MG102, M!DGE, GPRS/EDGE/UMTS routers – © RACOM s.r.o. 26
Configuration