RACOM Midge MG102, Руководство по эксплуатации

Страница: 109 / 122

Usage and Return Value Command
‘cli select manual’ selects the network provider defined by the
supplied Local Area Identity (LAI) for the specified SIM card
Usage: select manual <LAI> [sim1/sim2]
cli select manual
Note
The following commands are identical:
‘cli select manual <lai>’ and ‘cli select manual sim1
<lai>’
The following commands have the same effect:
‘cli select manual <lai> sim1’ and ‘cli set networkselec-
tion.network_lai=<lai>
‘cli select manual <lai> sim2’ and ‘cli set networkselec-
tion.sim2.network_lai=<lai>
‘cli status’ returns both, ‘cli status overview’ and ‘cli status system’
concatenated.
The option -html is used to query a HTML version of the status
information.
cli status
show the status of all interfaces, networks and services. cli status overview
show the status of all interfaces cli status overview interfaces
show the state of the SIM-Card
cli status overview interfaces
sim_state
show the state of the PIN
cli status overview interfaces
pin_state
show the actual signal strength
cli status overview interfaces sig-
nal_strength
show the state of the wireless connection
cli status overview interfaces
con_state
show the type of the wireless connection
cli status overview interfaces
con_type
show the mode of the network selection
cli status overview interfaces
net_sel_mode
show the current network provider
cli status overview interfaces
net_sel_prov
show the amount of received and transmitted data
cli status overview interfaces
data_rxtx
show the actual down- and upstream rates
cli status overview interfaces
stream_updown
show the last reset date of data counter
cli status overview interfaces
last_reset
show the status of all networks cli status overview networks
show the state of the NAPT service on the mobile if
cli status overview networks
napt_state_mob
109 © RACOM s.r.o. – MG102, M!DGE, GPRS/EDGE/UMTS routers
Configuration