RACOM Midge MG102, Руководство по эксплуатации

Страница: 30 / 122

COM Port
Description Parameter
RS232 or RS485. Consider the pin assignments on chapter Appendix A, Connectors
and Cables
Physical pro-
tocol:
This property specifies the baud rate of the COM port Baud rate:
This property specifies the parity used with every frame that is transmitted or received. Parity:
This property specifies the number of stop bits used to indicate the end of a frame. Stop bits:
This property specifies the number of data bits contained in each frame. Data bits:
In XON/XOFF software flow control, either end can send a stop (XOFF) or start (XON)
character to the other end to control the rate of incoming data. Software flow
control:
In RTS/CTS hardware flow control, the computer and the modem use the RTS and
CTS lines respectively to control the flow of data Hardware flow
control:
USB Port
valid only for M!DGE
MG102, M!DGE, GPRS/EDGE/UMTS routers – © RACOM s.r.o. 30
Configuration