Racepak IQ3 Drag Dash, Руководство по установке

Страница: 60 / 63

IQ3 Data Logger Dash Installation Manual
60
Troubleshooting and FAQ
The IQ3 Drag Dash is designed to provide trouble free performance. At times, problems could
be encountered that may affect data. We have attempted to provide answers for some of the
most common questions and problems.
DataLink will not communicate with the IQ3 Drag Dash
The IQ3 Drag Dash contains a built-in USB adapter that allows it to communicate using a COM
port connection with its USB cable.
Verify the correct COM port of the user’s PC is selected. To perform this procedure:
A. Connect the USB cable between the IQ3 Drag Dash and your PC
B. Turn on the power to the IQ3 Drag Dash and wait 5 seconds
C. Locate the Device Manager within Windows
D. Locate Ports (COM & LPT) in the list
E. Select the + or ▼ to expose dropdown list
F. Ensure the Racepak USB Device is listed and a COM number is listed
i. If no listing is found, check power on dash and ensure the DataLink
software was properly installed as the USB driver is installed during the
software installation.
ii. If listing is shown, note the COM number and exit the device manager
G. Open DataLink software, go to Settings->Preferences within the Menu Bar
H. Select matching COM port number from the Logger COM Port setting
V-Net Sensor Channels “lock up” from time to time
If a V-Net channel is subjected to excessive electrical interference, the channel will shut down
for a period of time, then re-set and start displaying again. Ensure none of the V-Net modules
or cables are against or in the immediate area of ignition system components.