Racepak IQ3 Drag Dash, Руководство по установке

Страница: 59 / 63

IQ3 Drag Dash Installation Manual
59
Dash Info Tab
The Dash Info contains setup parameters specific to the dash. Locate the Custom Programming
Options area. This is found on the left side of the page.
To change any of the following parameters, place the mouse cursor on the desired text line and
left click. This will activate the input box for the particular setting to the right of the selected
text line. Changes are entered in the input box and then sent to the dash via the SEND
Configuration button as found in the lower right corner of the open window.
In most instances, these settings are also accessed by the external programming buttons
IQ3 Logger
Product type, do not change
ECU Type
Used to enable the ECU input, this selection will need to be
enabled by selecting the appropriate ECU, from the ECU
Type dropdown box. This setting can also be changed via
Setup Mode 1 using the external programming buttons.
three or more satellites.
Dash Model
Dash model
Dash Serial #
Serial number for product
Firmware Version
Firmware version for connected product. Updates, when available, are posted at
http://www.racepak.com/downloads/