Racepak IQ3 Drag Dash, Руководство по установке

Страница: 51 / 63

IQ3 Drag Dash Installation Manual
51
Recording time.
Setting the Record Length
Locate the
Max Number of Seconds to Record option, and select it as described above. The
options edit box will now display the currently programmed number of seconds to record. Enter
the new desired value in the edit box.
Sending the Record Parameters to Your Data Logger
The final step in programming the record parameters on your data logger is to send the
configuration just edited from your PC to your data logger over the USB communication cable
connected above. To send the information click, on the
Send Configuration button located in
the lower left-hand section of the logger dialog box. A progress box will be displayed showing
the information being transferred to your data logger. When completed, the last line in the
progress box should read
Devices Programmed Successfully .
You have completed the programming of your data logger. The new programming will become
effective the next time you turn your data logger on.