Racepak IQ3 Drag Dash, Руководство по установке

Страница: 33 / 63

IQ3 Drag Dash Installation Manual
33
DatalinkII Software Installation
The DatalinkII software is utilized to program the IQ3 Drag Dash unit. If a previous version of
DatalinkII exists on the programming PC, update to the latest DatalinkII software (version 4.6.0
or higher), included with the IQ3 Drag Dash package.
During the program installation (step 7), select the unit to be utilized. Be sure to select “IQ3
configuration for Drag Race Logger” as this will install the necessary files needed for the IQ3
Drag Dash unit.
To install the software
1. Close all/any programs before beginning the DatalinkII installation
2. Insert Racepak USB Memory Flash Drive a USB port of the Laptop/PC
3. After a few seconds, the installation program should automatically start
4. “ Welcome to the Install Wizard for DatalinkII ”. Click Next
5. “ License Agreement ”. After reading, Click Yes
6. “ Choose Destination Location ” Default C:\Program Files\DatalinkII, Click Next
7. “ Data Logger Installation and Support ”, Select the check box for IQ3 Drag Race Logger ,
Click Next
8. “ Select Program Folder ”, Default is DatalinkII, Click Next
9. Install will start as noted by progress bar
10. Installing for the first time, a “ Welcome to the Install Wizard for PL-2303 USB-to-Serial ”
window will open, Click Next
11. “ License Agreement ”, after reading, Click YES
12. Installation PL-2303 Wizard Complete, Click Finish
13. Installing for the first time, a “ Welcome to the Install Wizard for ST Driver ” window will
open, Click Next
14. “ License Agreement ”, after reading, Click YES
15. Installation Wizard Complete, Click Finish
16. DatalinkII will now open
17. Software Installation Complete
18. Upon completion of installation, a new shortcut icon (shown right) will be
added to the PC desktop with a title “DatalinkII Program”. Double click on
the icon to start the DatalinkII software.