Racepak IQ3 Drag Dash, Руководство по установке

Страница: 41 / 63

IQ3 Drag Dash Installation Manual
41
Bar Graph (Sweep Tach)
Function Description
KPH MPH RPM Selection defines channel name on dash
Channel to
Display Pull down arrow selects channel for bar graph
data
Averaging Filter Smooths displayed data. 10 is default
Minimum Value Determines starting point for bar graph
Maximum Value Determine ending point for bar graph
Tag Start Value Determines start value for bar graph
Tag Value per 10
Bars Determines value for each 10 bar segment. There
are a total of 8, 10 bar segments for 80 total bars .
Channel tag value must be equally divisible by the
80 bars to correspond correctly with a channel’s
actual reading.
OK Closes window following programming changes
Gear Indicator (center of dash) “Gear Position”
Remaining Inputs
As shown above, to program an input area, simply locate the desired sensor channel by use of
the pull down arrow, select the sensor channel, then define the remaining values for Decimals
to Display, etc.
Function Description
Channel To Display Pull down arrow selects sensor channel
Averaging Filter
Smooths displayed data. 10 is default
Display Mode Selects when to display the gear number
in the center display.
OK Closes window following programming changes
Function Description
Channel to Display Pull down arrow selects sensor channel
Decimals to Display Number of digits to display after decimal
Averaging Filter Smooths displayed data. 10 is default
Channel Tag Text Name/channel label to be displayed. 5
total characters