Racepak IQ3 Drag Dash, Руководство по установке, Страница: 24 / 63

IQ3 Data Logger Dash Installation Manual
24
Button Functions in Setup Mode
While the IQ3 Drag Dash is in normal display mode, the programming buttons will perform the
following functions:
Button Short Press (1 flash) Medium Press (2 flashes) Long Press (3 flashes)
Button 1 Advance to Next Display Page Enter Setup Mode Displays the current time
in upper right display
position
Button 2 Clear/Acknowledge any Active
Warnings Does nothing Displays the current time
in upper right display
position
Programming in Setup Mode
The programming functions are arranged in a pre-defined order. This allows the user to enter
the programming mode, and then toggle through to the desired feature by using the left or
right button, depending on the mode.
Setup Mode is used to program some basic features on the unit without the need to connect to
a PC. It is utilized to program items such as screen brightness, LED brightness, reset to defaults,
etc.
Entering Setup
1. Press and hold the Button 1 for TWO shift light blinks – MEDIUM press
2. The Dash will display SETUP 1?
3. Confirm you wish to enter the setup mode by pressing the Button 1 for ONE shift light blink
– SHORT press
To cancel entering Setup Mode, press the Button 2 for a SHORT press
The following are in the order in which the individual programming features will appear.
Setting as
Displayed on
Dash
Program
Setting Description
Programming
Command
Accept and
Advance
Accept and
Exit
SET DEFAULTS
Resets all dash settings to factory
default values
N = No
Y = Yes
Auto saves and exits when selected-
All settings and pages are set back to
as factory shipped, except for
hour/service and odometer values
Short Press Button 2 to
toggle between Y/N
Short Press
Button 1 Long Press
Button 1
SET TIME/DATE
Adjust time of clock feature
N = No
Y = Yes
If Yes is selected and accepted,
Button 2 increases time/value
Button 1 accepts value, moves to
minutes, AM/PM etc
Short Press Button 2 to
toggle between Y/N
Short Press
Button 1 Long Press
Button 1