Chapter 9: Configuration
Contacts
Quantum DXi4700 User’s Guide
335
Fibre Channel Initiators and Targets List
The
Fibre Channel Initiators & Targets
section displays the following information for all Fibre Channel
ports:
Alias
The alias of the Fibre Channel port.
WWPN
The World Wide Port Number of the Fibre Channel Port.
Port Type
The current mode of the Fibre Channel port (
Initiator
or
Target
).
Note:
Click
Refresh
to update the list with the latest port information.
The
Backpanel Locations
section displays a graphical representation of the Fibre Channel ports as they
appear on the rear of the system. The diagram shows the status of each Fibre Channel port:
Mapped
Target
(green),
Unmapped Target
(yellow),
Active Initiator
(blue), or
Inactive Initiator
(orange).
Editing the Fibre Channel Port Type
Edit the port type to change the mode of a Fibre Channel port to initiator or target mode. You can change the
port mode only on inactive connections:
Additional Information
l
Before changing a Fibre Channel port type from initiator to target, unplug the Fibre Channel port wire
connection.
l
Before changing a Fibre Channel port type from target to initiator, un-map any host mapping on the
Fibre Channel port, and unplug the Fibre Channel port wire connection.
To edit the Fibre Channel Port type:
1. Select the port in the list and click
Edit
.
2. Select the new port mode (
Initiator
or
Target
) in the drop-down box,
3. Click
Update
.
Contacts
The
Contacts
page allows you to enter company information. You can also enter individual contact
information for primary and secondary contacts.
To access the
Contacts
page, click the
Configuration
menu, and then click the
Contacts
tab.
The
Contacts
page contains the following tabs:
