manualshive.com logo in svg

Quantech QCC2015CEE, Инструкция по установке, эксплуатации и обслуживанию, Страница: 28 / 172

Поделиться
Скачать
Quantech QCC2015CEE Скачать руководство пользователя страница 28

QUANTECH

28

Form QCC2-NM1 

Issue Date: 5/20/2021

SECTION 3 – HANDLING AND STORAGE

Moving the condensing unit

Before moving the unit, ensure that the installation site 

is suitable for installing the unit and is easily capable 

of supporting the weight of the unit and all associated 

services.
The units are designed to be lifted using cables. A 

spreader bar or frame should be used in order to pre-

vent damage to the unit from the lifting chains.
Units are provided with lifting eyes in the sides of the 

base frame, which can be attached to directly using 

shackles or safety hooks.

The unit must only be lifted by the base 

frame at the points provided. Never move 

the unit on rollers, or lift the unit using a 

forklift truck.

Care should be taken to avoid damaging the condenser 

cooling fins when moving the unit.

Lifting weights

For details of weights and weight distribution, refer to 

the data shipped in the unit information packet and unit 

nameplate.

Содержание QCC2015CEE













































































































































































Отзывы:

Нет отзывов