Quantech QCC2015CEE Скачать руководство пользователя страница 119

Страница: 119 / 172

QUANTECH

119

SECTION 7 – UNIT CONTROLS

Form QCC2-NM1

Issue Date: 5/20/2021

Entry keys

00068VIP

The ENTRY keys allows the user to view, change

programmed values. The ENTRY keys consist of an

↑ (UP) arrow key, ↓ (DOWN) arrow key, and an EN

TER/ADV key.

Up and down arrow keys

Used in conjunction with the OPER DATA, HISTORY,

COOLING SETPOINTS, SCHEDULE/ADVANCE

DAY, OPTIONS and CLOCK keys, the ↑ (UP) and ↓

(DOWN) arrow keys allow the user to scroll through

the various data screens. Refer to the section on “Dis-

play/Print” keys for specific information on the dis-

played information and specific use of the ↑ (UP) and

↓ (DOWN) arrow keys.
The ↑ (UP) arrow key and ↓ (DOWN) arrow key are

also used for programming the control panel such as

changing numerical or text values when programming

cooling setpoints, setting the daily schedule, changing

safety setpoints, unit options, and setting the clock.

Enter/Adv key

The ENTER/ADV key must be pushed after any change

is made to the cooling setpoints, daily schedule, safety

setpoints, chiller options, and the clock. Pressing this

key “enters” the new values into memory. If the EN-

TER/ADV key is not pressed after a value is changed,

the changes will not be “entered” and the original val-

ues will be used to control the chiller.

Programming and a description on the use of the ↑ (UP)

arrow key, and ↓ (DOWN) arrow, and ENTER/ADV

keys are covered in detail under the SETPOINTS, and

UNIT keys.

Содержание QCC2015CEE













































































































































































Результаты поиска

Содержание QCC2015CEE

Отзывы:

Quantech QCC2015CEE, Инструкция по установке, эксплуатации и обслуживанию, Страница: 119 / 172

Результаты поиска

Содержание QCC2015CEE

Отзывы: