CAUTION
Do not attempt to replace the washers with any other washer that has not been
provided by Qualstar.
Rear view of Qualstar
washer (P/N 510703-01-0)
showing the shoulder.
Figure 5-4 Screws and Washers securing a Rack Rail Assembly to the Rack Posts
7.
Using a 11/32” wrench, tighten all of the nuts that were loosened in step 3 when
the brackets were moved on the rack rail assembly.
8.
Repeat Steps 5 through 7 to attach the remaining rack rail assembly to the rack.
9.
The library will be secured to the front rack posts using one screw on each side.
Cage nuts need to be installed in the rack posts that correspond with a mounting
hole in the library.
10.
Using either a tape measure or by counting holes in the rack posts insert one of
the supplied cage nuts into the left front rack post as shown in Figure 5-5.
511000 Rev. F
Installation 5-5
