511000 Rev. F
11-3
the Configuration page. To
the following choices will a
Figure 11-2
11.2.1
T
ll be in one of five modes: None, Library, Sequential,
pe drive.
vements to
e tape drive allocated to this partition is available for
normal cartridge movement operations to and from the
Sequential Operation
uch the Edit button to allow the Mode to be selected and
ppear as seen in Figure 11-2.
Partition 1 Mode Choices
ype
Each partition in the RLS wi
Recycle or Dual Bin. Briefly, in the Library mode, the tape drive’s allocated to the
partitions are available to the host computer as a source/destination location for
cartridge movements. In the Sequential, Recycle and Dual Bin modes, the host
computer cannot directly cause cartridge movements to or from the ta
Disabled
This partition is not active and will not appear as an
available option.
Dual Bin
The tape drive allocated to this partition is dedicated to
receiving cartridges under changer control. The changer
will not perform host-requested cartridge mo
this device. This mode is similar to Sequential except the
source and destination cartridge locations are separate
and distinct.
Library
Th
drive under host computer control.
Recycle
The Recycle mode shares the attributes of the Sequential
mode. It has the additional feature of automatically
restarting the cartridge movement cycle after the last
cartridge in the drive’s location set has been returned.
Sequential Modes
