QRPworks SideKar Decoder Edition, Руководство пользователя

Страница: 17 / 88

SideKar Decoder Edition User Manual rev 1.0 Page 17 of 88
Connections to Rigs:
•
KX3/KX2
: connect the supplied 3.5 mm (1/8”) stereo
cable from the SideKar Decoder Edition
“Rig RS232””
port on the top to the KX3 ACC1 or KX2 ACC
connectors. The right-angle connectors on both ends
are important to reduce the strain on the printed circuit
boards.
Do not connect the radio cable if the PC
cable is in use.
•
K3 : use a DB9-M to 3.5 mm cable (available from
QRPworks) from the K3 RS232 port to the SideKar
Decoder Edition KX Rig port. Do not connect the
radio cable if the PC cable is in use.
•
K3s : plug the RJ45 to DE9 adapter cable that was
supplied with the K3s into the K3s RS232 port. Use a
DB9-M to 3.5 mm cable (available from QRPworks)
from the DE9 adapter to the SideKar
Decoder Edition
KX Rig port. Do not connect the radio cable if the
PC cable is in use.
•
Icom IC-705 : Interfacing the SideKar Decoder Edition
with a Icom IC-705 is done using a custom Bluetooth rig
interface accessory from QRPworks, which provides
CAT connectivity to the rig.
•
Plug a 3.5mm stereo cable between the SideKar
Decoder Edition
“Rig – 5 Volt Serial Port” on the
right side and the Bluetooth
rig interface’s “5
VOLT SERIAL PORT”.
•
Apply 8-15 VDC power to the Bluetooth rig
interface.
•
On the IC-705,
o
Go to Menu / Setup / Bluetooth
o
Pair with the SideKar
o
Enter the passcode 1234 (only needed
to be done once)
•
Turn on the SideKar Decoder Edition