LED
Status
Description
2.5 Gigabit Ethernet (1 Gbps or
100 Mbps speed)
Orange
The network connection is operating at 1 Gbps
or 100 Mbps.
Flashes orange
Data is being transmitted.
Off
There is no network connection.
10 Gigabit Ethernet (10 Gbps
speed)
Green
The network connection is operating at 10
Gbps.
Flashes green
Data is being transmitted.
Off
There is no network connection.
10 Gigabit Ethernet (5 Gbps, 2.5
Gbps, 1 Gbps, or 100 Mbps)
Orange
The network connection is operating at 5 Gbps,
2.5 Gbps, 1 Gbps, or 100 Mbps.
Flashes orange
Data is being transmitted.
Off
There is no network connection.
2.5 Gigabit Ethernet WAN
Orange
A WAN connection has been established.
2.5 Gigabit Ethernet LAN
Green
A LAN connection has been established.
10 Gigabit Ethernet WAN
Orange
A WAN connection has been established.
10 Gigabit Ethernet LAN
Green
A LAN connection has been established.
Reset Button
QNAP routers can be reset to factory defaults using the reset button located on the rear side of the device.
For details on the component placement, see the rear side of the device.
Operation
User Action
Result
Reset
Press and hold the button for 10
seconds
The router resets and all default settings are restored.
This will clear any statically assigned IP address
information, WAN and LAN configurations, and security
settings.
The router is unbound from the QNAP ID.
QHora-322 User Guide
Basic Operations
14
