4. Select WAN as the interface.
5. Configure the interface settings.
Setting
User Action
Interface name
Specify an interface name between 1 and 64 characters.
Description (optional)
Enter a description for the interface.
MTU
Specify an MTU value between 576 and 1500.
Note
The Maximum Transmission Unit (MTU) is the largest
packet size that is transmitted by a network.
Transferring (Tx) ISP line rate
Specify the gross transmitting bit rate of the physical layer.
Note
You can set the ISP line rate only if you have
configured the QuWAN and QoS settings.
Receiving (Rx) ISP line rate
Specify the gross receiving bit rate of the physical layer.
Note
You can set the ISP line rate only if you have
configured the QuWAN and QoS settings.
6. Configure the tagged or untagged member port of the VLAN.
7. Configure the IPv4 address assignment settings.
a. Select the interface connection from the following options.
Setting
Description
DHCP
Obtain IP address settings automatically via DHCP
Static IP
Manually assign a static IP address. You must specify the following information:
• Fixed IP Address
• Subnet Mask
• Default Gateway
• Primary and secondary DNS servers
PPPoE
Select to specify a username and password for Point-to-Point Protocol over Ethernet
(PPPoE).
b. Configure the DNS settings.
QHora-322 User Guide
Network Settings
33
