manualshive.com logo in svg

QNAP QHora-322, Руководство пользователя

Поделиться
Скачать
QNAP QHora-322 Скачать руководство пользователя страница 54

Setting

Description

Encryption

Select from the following encryption methods:

• Medium (AES 128-bit)

• High (AES 256-bit)

DNS

Specify a DNS server for the OpenVPN server.

Note

The DNS server limitation is 1 by default.

6. Enable Use this connection as a default gateway for remote devices. 

Note

Enable to allow the default network gateway to be redirected across the OpenVPN server. All

non-local traffic from the client is transferred through the VPN server.

7. Enable Enable compressed VPN link. 

Note

This setting compresses data before transferring it over the VPN. This will increase data

transfer speeds, but requires additional CPU resources.

8. Click Apply. 

QuRouter saves the OpenVPN server settings.

9. Optional: Click 

 to download configuration files to set up an OpenVPN server manually.

Enabling a WireGuard VPN Server

1. Log in to QuRouter.

2. Go to QVPN Servers > QVPN Settings .

3. Enable WireGuard.

a. Identify the WireGuard server.

b.

Click 

. 

QHora-322 User Guide

Network Settings   

53

Содержание QHora-322














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды