Note
Prefix delegation is available only for PPPoEv6 and Stateless (SLAAC) options.
9. Click Apply.
QuRouter adds the WAN VLAN interface.
Adding a LAN VLAN Interface
1. Log in to QuRouter
2. Go to Network > VLAN Settings > VLAN Settings .
3. Click Add VLAN.
The VLAN Configuration window opens.
4. Select LAN as the interface.
5. Configure the interface settings.
Setting
User Action
Interface name
Specify an interface name between 1 and 64 characters.
Description (optional)
Enter a description for the interface.
MTU
Specify an MTU value between 576 and 9000.
Note
The Maximum Transmission Unit (MTU) is the largest
packet size that is transmitted by a network.
6. Configure the tagged and untagged member ports of the VLAN.
7. Configure the IPv4 address assignment settings.
Setting
User Action
Fixed IP address
Specify a fixed IP address.
Tip
Examine your network setup for guidance on how to best
configure these settings.
Subnet Mask
Specify the subnet mask used to subdivide your IP address.
Enable Spanning Tree
Protocol (STP)
Enable to prevent network loops.
QHora-322 User Guide
Network Settings
35
