Setting
Description
Pre-shared key
Specify a pre-shared key (password) to verify connecting VPN clients.
Tip
Pre-shared key requirements:
• Length: 8–16 ASCII characters
• Valid characters: A–Z, a–z, 0–9
DNS
Specify a DNS server for the QBelt server.
Note
The DNS server limitation is 1 by default.
6. Click Apply.
QuRouter saves the QBelt server settings.
Enabling an L2TP VPN Server
1. Log in to QuRouter.
2. Go to QVPN Servers > QVPN Settings .
3.
Under L2TP, click
.
Important
You cannot enable the L2TP server if the router is using the QuWAN service.
To enable the L2TP server, go to QuWAN > QuWAN Settings and click Leave the organization
and QuWAN.
4.
Click
.
The QVPN Settings window appears.
5. Configure the L2TP server settings.
Setting
Description
Client IP pool
Specify a range of IP addresses available to connected VPN clients.
Important
By default, this server reserves the use of IP addresses
between 198.18.3.2 and 198.18.3.254.
If another connection is configured to use this range,
an IP conflict error will occur. Before adding this
server, ensure a VPN client isn't configured to use this
range as well.
Authentication
Select one of the following authentication methods:
• PAP
• MS-CHAPv2
QHora-322 User Guide
Network Settings
51
