QMS 3260, Операция

Страница: 15 / 194

%&#
"
'
2 Gently lift up the right
paper guide, and slide it to
the desired setting.
3 While pressing down the
gray handle on the rear
media guide, slide it to the
desired width setting.
» Note: If you’re loading the
same size paper, you don’t
have to adjust the guides.
Make sure the papers stack’s
height does not exceed the
paper limit mark.
4 Align the four corners of
the paper and place the
paper in the tray.
The paper should enter eas-
ily between the guides. Make
sure the paper does not get
bent upwards by the guides.
» Note: Make sure the guide
stopper is locked firmly in the
guide hole on the bottom of
the tray. Adjust the guide to
the paper size correctly;
otherwise, paper jams can
occur.
5 Insert a correct paper size
label into the paper size slot on the tray, then push the tray all the way back
into the printer until it latches.
» Note: The top sheet in the tray will be the first sheet printed for your job.