6
7
6. ALARMS
68
6.1 Alarm Input
68
6.2 Alarm Output
70
6.3 Alarm Setup and Activation
71
7. HARD DISK DRIVE
74
7.1 Installation/Removal
74
APPENDIX
76
A.1 Troubleshooting
76
A.2 Specifications
79
Q-SEE PRODUCT WARRANTY
80
Questions or Comments? Contact Us
81
To prevent damage to your Q-See product or injury to yourself or to others, read and
understand the following safety precautions in their entirety before installing or using this
equipment. Keep these safety instructions where all those who use the product will read them.
n
Check the unit and any accessories included in the package immediately after opening. If
items are missing or damaged, repackage and return to the point of purchase.
n
Use the proper power source. Only use the power adapter supplied with your system. Do
not use this product with a power source that applies more than the specified voltage (100-
240V AC).
n
Never insert anything metallic into the NVR. Inserting anything into the NVR or its case can
be a source of dangerous electric shock.
n
Do not operate in dusty areas. Avoid placing the NVR in places that are dusty.
n
Do not expose this product to rain or use near water. If this product accidentally gets wet,
unplug it and contact Q-See immediately.
n
Keep product surfaces clean and dry. To clean the outside case of the NVR, gently wipe
using a lightly dampened cloth (only use water, do not use solvents).
n
Do not operate this NVR without the cover securely in place. Do not attempt to do any
repairs to the NVR yourself. If there are unusual sounds or smells coming from the NVR,
unplug it immediately and contact Q-See technical support. Under no circumstances
should the cover be removed while the device is connected to a power source. You should
only remove the cover to install/replace the hard disk drive (
See Chapter 6
) or replace the
standard 3v lithium cell battery on the motherboard. These are the only user serviceable
parts. You may need to replace the battery if the internal clock resets itself after a power
outage
n
Handle NVR box carefully. If you accidentally drop your NVR on any hard surface, it may
cause a malfunction. If the NVR doesn’t work properly due to physical damage, contact
Q-See for repair or exchange.
n
Make sure there is proper air circulation around the unit. This NVR system uses a hard drive
for video storage which generates heat during operation. Do not block air holes located on
the sides of the NVR as they are designed to keep the system cool while running. Install or
place this product in an area where there is ample air circulation.
n
Provide proper ventilation. This NVR has a built-in fan that properly cools the processor. Do
not cover or impede this fan.
INTRODUCTION
CHAPTER 1
WARNING! ELECTRIC SHOCK RISK!
