PSI System Controls and Diagnostics
F3200E User Manual
F3200E_UM_180726 Page 54 of 107
If you continue, all gains will be set back to 1.000 and all offsets to zero. Be certain that this is
what you want to do.
11.10 Real Time Processing panel
The F3200E can run a wide range of user-programmed sequences for control and data logging
using the G2 Real Time Processing utility. If the F3200E is acting as a fiber optic loop
controller, the controls and data can be on the looped devices as well as the F3200E itself.
Examples of applications are coordinated data collection across multiple devices, servo loops and
reacting to particular sets of circumstances. Generally development of the file that defines a
particular real time application will be initiated by Pyramid, although the use of transparent xml
format files makes it relatively easy for users to modify and extend to suit their requirements.
Figure 40. Real Time Processing controls
The Upload Configuration button allows you to select an xml file that tells the F3200E how to
behave during real time processing, such as which parameters to set and read, how to compute
derived parameters, the paths to the looped devices and so on. Upload Map allows you to select
a csv file which provides the sequence of set points for the controlled variables. Once the device
is configured and the map is accepted, then you arm and initiate the map to execute it. Measured
and calculated values are displayed and graphed while the map executes. See section 18 for
further details.
11.11 Properties panel
The properties panel is where you can update the F3200E firmware and change its network
settings.
