manualshive.com logo in svg

Pyramid Technical Consultants F3200E, Руководство пользователя

Поделиться
Скачать
Pyramid Technical Consultants F3200E Скачать руководство пользователя страница 31

PSI System Controls and Diagnostics 

                                                        

           

F3200E User Manual 

 

             F3200E_UM_180726                                       Page 31 of 107 

 

 

11

 

Using the PTC Diagnostic G2 Host Program 

The PTC DiagnosticG2 is a stand-alone program which allows you to read, graph and log data 
from the F3200E, and set all the important acquisition control parameters.  It supports 
communication via any of the interfaces.  For some applications it may be adequate for all of 
your data acquisition needs.  The Diagnostic uses the same function library that is exposed for 
users who develop their own host applications, and therefore also serves as a debugging aid.  

PTC DiagnosticG2 was introduced to support the G2 range of Pyramid Technical Consultants, 
Inc. products which feature embedded Linux processors and built-in Ethernet interfaces.  It is not 
compatible with the PSI Diagnostic G1 program which supports previous Pyramid products.  
However the PTC Diagnostic G2 program supports most of the previous products also, and will 
be extended in the future to add support for the full range. 

Your F3200E was shipped with a USB memory stick with the installation files you need.  We 
recommend that you copy the files into a directory on your host PC.  Currently the program 
supports connection to the device via Ethernet.  The fiber optic and serial ports will be added in a 
future release.  Check the Pyramid Technical Consultants, Inc. web site at 

www.ptcusa.com

 for 

the latest versions.   

In this section we’ll describe connecting to the device using its Ethernet port and the PTC 
DiagnosticG2.  The other communication and host software options will be described in the 
following section. 

 

11.1  Installation 

The PTC DiagnosticG2 program runs under the Microsoft Windows operating system (Windows 
versions XP, 7, 8, 10).  Linux versions are available to special request for selected Linux 
distributions.  Contact Pyramid Technical Consultants for further information. 

Copy the installer file PTCDiagnosticG2Setup.msi to the hard drive of the host computer.  The 
program will run on Windows XP, Vista and 7.  The PC must have a standard Ethernet port. 

Run the installer and follow the prompts. 

Содержание F3200E












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды