Promax HD Ranger +, Руководство пользователя

Страница: 128 / 224

9-120 December 2014
►
JESS commands :
Through the JESS function is possible to control the devices of a TV satellite
installation that are compatible with JESS technology ( JULTEC Enhanced
Stacking System ). This technology has two main functionalities: one for
configuring the JESS headends, and another for configuring the JESS
sockets. JESS requires bidirectional DiSEqC capabilities. Although this
equipment do not have such capability, a simpler way to blind configure JESS
units has been implemented, without any confirmation other than spectrum
reference. For more information about JESS technology, developed by
JULTEC, refer to its website ( http://jultec.de/).
Connect the RF cable (see Figure 6) to the RF connector for the input
signal of the equipment.
Press the Spectrum key to access the spectrum analyser mode.
Press the Settings key and select the satellite band. From the
Settings menu, select the polarization (horizontal/vertical) and the
satellite band (high/low).
If necessary, enable the Supply output and select the supply voltage
for the LNB.
In the option JESS , select ON to enable it. It appears the JESS icon at
the top right corner of the screen.
Now the JESS option shows a new menu. Select Configuration to
access the JESS parameters. The user can select the power, central
frequency, tone beacon and satellite for each band. The user can also
select the number of user bands and the available satellites through
the option "Configuration" on key
.
Figure 73.