Promax HD Ranger +, Руководство пользователя

Страница: 90 / 224

7-82 December 2014
7.8.2.1 Settings
User can adjust some parameters on the Signal Monitoring:
Figure 49.
►
File name :
User can give a name to the file where data is saved. All measurement that
can be seen in the MEASUREMENT 1/3 screen (frequency, power/level, C/N,
PLP identifier, MER, CBER, LBER and LM) will be stored on the data file. Be
sure to change the file name when starting a new signal monitoring. If not,
new data file will be saved on the last one.
►
Comment :
User can write some comments about the monitoring.
►
Mode :
There are two options: Continuous or Manual . In continuous mode a
sample is taken automatically every sample time. In manual mode a sample is
taken every time that user presses the joystick.
►
Sample Time :
Time between acquisitions. Only when working in continuous mode. Minimum
time is 1 second.
►
Span time :
It is the width, in time, shown on screen for the X axis.
►
Save to :
There are two options: Internal or USB . For Internal option it saves the file
with all data in the internal memory of the equipment. For USB option it saves
the file with all data in a USB flashdrive connected to the micro-USB port of
the equipment.