Promax HD Ranger +, Руководство пользователя

Страница: 153 / 224

12 December 2014
DVB-C2 Measurements
Power
Measured power over the entire bandwidth of the channel.
C/N
Carrier/Noise ratio where C is the received power of the modulated carrier
signal and N is the noise power received. To measure it correctly the
channel should be tuned at its centre frequency.
MER
Modulation Error ratio with indication of Link Margin(LM).The link margin
indicates the safety margin respect to the MER level , measured for the
degradation of the signal up to the QEF (Quasi Error Free) value. MER
represents the ratio between the average power of the DVB signal and the
average noise power of the signal constellation.
BER ( CBER / LBER )
System error rate. In DVB-C2 makes use of two codes to correct errors
that are the LDPC (Low Density Parity Check) codes combined with BCH
(Bose - Chaudhuri - Hocquengham) to protect against high levels of signal
noise and interferences. On screen, under LBER measurement the number
of iterations LDPC is shown, that is, the number of times the LDPC
decoder for error correction has to pass through the signal and the ESR
(Error Second Ratio) that indicates the percentage of time with errors
after the BCH. Error correction is internal with BCH or external with LDPC.
The internal error correction provides basic minimum load while the outer
error correction is a correction with additional load. Also the PER
measurement is displayed, which is the number of erroneous packets,
that is, packets received during the measurement time and not
correctable by the demodulator.
CBER (Channel Bit Error Rate)
BER of the signal after passing through the COFDM demodulator and
before applying the error correction or FEC (Forward Error Correction).
LBER (LDPC Bit Error Rate)
BER of the signal after applying the correction errors LDPC (Low-density
parity-check).