Promax HD Ranger +, Руководство пользователя

Страница: 30 / 224

2-22 December 2014
To edit the file name user should follow these steps:
Using the joystick, place the cursor over the text box where the name
appears.
Move the cursor to place it next to the letter that user wants to edit.
Move the joystick on the virtual keyboard to edit.
To delete a letter, move the cursor to the right side of the letter and then press
the joystick on the Delete key or press (Del).
To enter an upper case letter press first or press the joystick on the key.
To block upper case press or press the joystick on the key twice
consecutively. To return to lower case press or the key again.
Keys with a point at the top right corner give access to special characters, by
keeping pressed the joystick for one second on the key.
After editing press (Ok) to validate the name and continue the process or
(Cancel) to cancel.
2.8 StealthID Function: Signal Auto-identification
The StealthID function of the
HD
RANGER
+
is a signal identification function
performed automatically by the equipment without any user intervention.
The equipment tries to identify the channel or frequency of the input signal it
receives, and according to the band selected by the user, it applies identifying
criteria according to the standards of that band. When the equipment recognizes
in the input signal the identification parameters of a standard, it decodes the
signal and shows the data of that signal on the screen.
The identification system tries to lock the first signal using the modulation
defined in the channel plan for that signal. If after five seconds it fails to lock
with that modulation, it starts the wheel for automatic detection. If then it locks
in a modulation other than indicated, it generates an internal temporary channel
plan to accelerate tuning the same channel later on.