Promax HD Ranger +, Руководство пользователя

Страница: 169 / 224

28 December 2014
►
Examples of multiswitch
SAT Inputs TER Inputs Satellites Terminals
Multiswitch 9/4
Multiswitch 5/16
Multiswitch 17/16
… 8
4
16
…
1
1
1
…
2
1
4
…
4
16
16
…
We will not consider the input of terrestrial TV, since this does not take part in
the satellite signal. Also the following indicated examples do not show more than
a single output. In the case of several outputs, the own operation scheme is
reproduced for each one of them, because they are independent of the others.
A3.5.1
Multiswitch (1 satellite)
Figure A3. 6.
In the DiSEqC
TM
menu of the
HD
RANGER
+
, select the band and the
polarisations desired and send the SAT A command, as it is indicated in the
following table:
Band Polarization Command
Low
Low
High
High
Horizontal
Vertical
Horizontal
Vertical
SAT A
SAT A
SAT A
SAT A
Very important : Whenever you wish to change of band or polarisation, it is
necessary to send the SAT A command at the same time, since multiswitch does
not respond to the habitual switching commands for a LNB (13V/18V/+22kHz): it
is necessary the complete
DiSEqC TM sequence to cause the commutation.