Promax HD Ranger +, Руководство пользователя

Страница: 208 / 224

December 2014
67
After settings, access the Advanced menu and press on Star t to
start the signal coverage analysis.
In
Automatic mode, the equipment takes samples automatically
according to settings (see next section). In Manual mode each time the
user presses the joystick the equipment takes a sample. Measurement
are linked to the GPS reference.
Access the Advanced menu and press on Stop to finish the signal
coverage analysis. Data obtained is automatically stored.
Access the data by pressing the Installation List key to check that
the monitoring data file has been saved. This file is a "Data Capture"
type. To manage the data, see below the section "Data File Processing".
A6.2.2 Settings
User can adjust some parameters on the Signal Coverage analysis:
Figure A6.1.
►
File name :
User can give a name to the file where data is saved. All measurement that
can be seen in the MEASUREMENT 1/3 screen (frequency, power/level, C/N,
PLP identifier, MER, CBER, LBER and LM) will be stored on the data file. Be
sure to change the file name when starting a new Signal coverage analysis. If
not, new data file will be saved on the last one.
►
Comment :
User can write some comments about the study.