Promax HD Ranger +, Руководство пользователя

Страница: 108 / 224

7-100 December 2014
After the exploration the following screen appears:
Figura 65.
The window is divided into three areas:
Spectrum and Measurement
It shows the cursor scrolling through each of the channels of the FM
band. On the bottom of the screen the channel and frequency appears
next to the Power/Level and the C/N ratio.
In the spectrum area there is the Minimum FM Level . This line is the
minimum signal level required to identify the FM signal. The channels
below that signal level will not be identified. It can be configured in the
"Measures" tab in "Preferences"
.
Progress Bar
It shows the signal type detected and the scan progress in real time. At
the end a box shows a message informing the exploration process has
finished.
Channel Plan
It shows a list with the channels being detected during the exploration of
the FM band. At the top and between parentheses there is the number of
detected channels to total channels. When moving the cursor through the
channels, the spectrum and measurement windows are dynamically
updated for the selected channel. User can mark / unmark the FM
channels to save in the channel plan.