Promax HD Ranger +, Руководство пользователя

Страница: 101 / 224

December 2014
7-93
Selected installation; date and time.
Tab identifying the displayed test point.
Current datalogger name.
Selected band; battery level.
Tab identifying each test point.
Date and time when the datalogger was created. Number of channels
locked (PASS) or not locked (FAIL)
Data table with measurement data for each channel. In order from left to
right: Colour identifying if the channel has been locked (WHITE) or not
locked (RED) channel; signal type; power/level; Carrier/Noise (C/N) rate;
MER; Link Margin. Move the joystick up or down to navigate along the
measurement data. Press the joystick on a channel to display the signal
parameters.
Softkey menus.
Acquisition
It contains two options:
Start : It starts the datalogger in the selected test
point.
Clear : It deletes the data in the selected test
point.
Channel plan
It displays a menu with the available channel plans
to select the channel plan whose data want to be
displayed. Channel plans available are those that
have been selected during the creation of the
datalogger.
Test Point
It contains four options:
Jump to : It allows selecting a test point.
Create New… : It creates a new test point.
Delete current : It deletes the current test point.
Delete all : It deletes all test points of the
datalogger.