24
PROMAG
STARMIX 60W - E60W - 60A - E60A - 120W - E120W
USER INSTRUCTIONS
GB
A 20- PROGRAM PARAMETER CHECK (P)
A 21 - HIGH PASTEURIZATION CYCLE
O F F
28
29
O F F
28
17
The machine has the possibility of personalizing a
program, according to the needs of the user.
In order to do so, read instructions regarding
personalized cycle (
P
).
Having personalized the program to be used,
parameters may be checked, progressively
displaying them in the following manner:
1 - The display must be in
OFF
position.
2 - Keep button (
26
) pressed.
3 - After five seconds display will visualize the first
personalized parameter.
4 - On pressing the new button (
26
), the second
parameter will be visualized and so on until the
last parameter, for a total of 15 seconds.
It should be noted that last parameter marked CL
00 should in no way be modified by user, leaving
this task exclusively to technician/installer.
5. On re-pressing button (
26
) the first parameter
will be displayed again and so on.
6. To return to
OFF
, press button (
29
).
1. Display in
OFF
position.
2. Press button (
28
): the display will visualize the
temperature measured by the product probe.
3. Press button (
17
): cycle
A
relative to high
pasteurization will begin.
The display will visualize the program selected
A and the temperature measured by probe.
For example,
A22
means:
cycle
A
for high pasteurization with initial temperatu-
re at 22°C.
The mixer motor starts up and its operation is
indicated with a second letter
A
.
For example,
A22A
means:
cycle
A
for high pasteurization with initial temperatu-
re at 22°C with mixer motor in operation.
The emulsioner motor starts up automatically at 40°C
in heating phase
