9
PROMAG
STARMIX 60W - E60W - 60A - E60A - 120W - E120W
USER INSTRUCTIONS
GB
A 2 - MACHINE DESCRIPTION
mark names
STARMIX 60 W
Without emulsifier, 60 litres, water condensation
STARMIX E60W
With emulsifier, 60 litres, water condensation
STARMIX 60 A
Without emulsifier, 60 litres, air condensation
STARMIX E60A
With emulsifier, 60 litres, air condensation
STARMIX 120W
Without emulsifier, 120 litres, water condensation
STARMIX E 120W With emulsifier, 120 litres, water condensation
Function:
MACHINE FOR PASTEURIZATION, MAINTENANCE
AND MATURATION OF ICE CREAM MIXTURES.
For technical data of machines, see enclosures.
Machine components
The machine is complete with a main frame with a
stainless steel structure, on a four-wheel base, one at
each corner.
The
frame
is parallelpipedal and it contains the tank,
the
electric box
and the
cooling system
.
The
cylinder
is vertically mounted, disposing of a
cooling system
on external surface (containing
refrigerant gas), a
heating system
(containing water)
and a deep basin (containing water), in which
resistances are located, and whereby heating is carried
out with ìbain-marieî method, a particular characteristic
of
Promag.
The mixer and emulsioner shafts are immersed in the
cylinder. They are fitted to respective motors, the latter
being assembled onto rear half-lid.
The main cooling system elements comprise: a
compressor, a condenser, a thermostatic valve and a
compressor pressure switch.
The cylinder disposes of an outlet which is located on
the front side of the machine.
This opening may be closed with a cock, provided with
a projecting piston in closing position.
Above solution guarantees a perfect hygiene, as the
mix contained in the cylinder has no chance of
stagnating in the stub pipe.
As already mentioned, two half-lids are located in
the upper part of the cylinder.
Two motors are assembled on the rear half-lid,
commanding the mixer and emulsioner shafts.
Above motors are conveniently protected by a
stainless steel casing.
The two half-lids are served by two safety magnetic
microswitches.
On opening any one of the two covers, all machine
functions are interrupted, and the writing "OPEN"will
appear on display.
As already mentioned, the motors are mounted on
motor bearings.
Above are served by a magnetic safety microswitch.
On lifting the motor bearings, all operations of the
machine are interrupted and "OPEN" will appear on
the display.
A manual tap controlling the washing shower is
situated on the upper left-hand corner of the front
side of the machine. The shower is located on the
bottom of the cylinder, in the right-hand corner.
A control panel, facing inwards, is located on the
upper front side of the machine, where an electronic
card may be found.
Control buttons are accessible on control panel.
The electric box, as already hinted, is inside the fra-
me and is found on the rear side of it.
Water connections for cooling system are present
on the rear side of the machine, in addition to those
for drinking water for small shower unit.
Electric feed cables are also present.