10
PROMAG
STARMIX 60W - E60W - 60A - E60A - 120W - E120W
USER INSTRUCTIONS
GB
A 4 - PRODUCTIVE CYCLE
The user opens the front half-lid (
3
), pours the mix into the cylinder and closes same.
He starts up productive cycle, after having set appropriate parameters with button (
11
). He unloads
product by operating lever (
36
) of cock (
9
).
A 3 - NUMBER OF USERS AND TYPE OF WORK
The machine is designed to be used by one operator only, in charge of loading product to be pasteurized,
setting productive cycle and subsequent recovery of product.
A 5 - OPERATING MODES
The machine is designed for a single type of continuous operation, on pressing pasteurization or
maintenance buttons.
Machine stops automatically and simultaneously leds light up corresponding to selected productive
cycle.
It may also be controlled by operating normal stop button (
29
).
A 6 - PRECAUTIONS
Danger points
The machine has certain danger points and areas
where accidents may occur if the following
precautions are not observed:
- It is forbidden and very dangerous to try and
gain access to pasteurization cylinder when same
is turned on and/or in motion.
- It is forbidden and very dangerous to carry out
any repairs on system, whether mechanical or
electrical, when the machine is functioning.
Refer to enclosures for electric and water
systems.
- It is forbidden to use the machine without
operatorís supervision.
- It is forbidden and very dangerous to introduce
any part of the body or any type of object into the
stub pipe of the mix when the cock is
disassembled.
- It is dangerous to touch machine ON/OFF wall
switch to turn machine on or off with wet hands.
- It is strictly forbidden to open electric box.
- It is forbidden and very dangerous to approach
the machine with magnetic materials, as they
would interfere with magnetic safety
microswitches located under the two cylinder
half-lids.
(
For the user only)
It is forbidden and very dangerous for user to
carry out any intervention which should be
done by a TECHNICIAN/INSTALLER.
Removal of protective coverings and access to
internal parts of machine, in addition to all
internal maintenance operations, repairs,
installation, transport and unpacking must be
carried out by qualified personnel.
