Proceq ZRS 6060, Инструкция по эксплуатации

Страница: 29 / 68

Page 29
Sample of information which can be inserted additionally
either directly in the measuring mode or in the archive.
Press to get to the number keyboard.
Press to get to the special sign keyboard.
To get back to the standard keyboard press .
9 Quickstart menu
Press to get to the quickstart menu.
This is an option at extra cost. Therefore this icon will only be displayed
if the WAAS GPS-unit has been purchased. For further information see
chapter 10.4
“WAAS GPS-unit” on page 35.
All stored files are located in the archive. The measurements can be
edited, deleted, exported to USB flash drive as well as printed out here.
For further information please refer to chapter 11
“Archive” as from
page 39.
Connect the ZRS 6060 with an external printer e.g. the portable USB-
printer. Press the desired measurement to print out the test report. If no
measurement is selected the last one will be printed. The default
settings which information will be included in the measuring report can
be changed in the menu as described in chapter 13.6.8
“Printer” on page 53.
Press to trigger a calibration. After the calibration a message
appears about the successful calibration or about the deviation. With
the calibration will be confirmed. For further information
please refer to chapter 7
“Calibrate” as from page 18.
10 Options
10.1 Illumination adapters
Should you require additional illumination (entrance) angles, use optional
illumination adapters. The available illumination adapters are listed in chapter 3.6
on page 11.