Proceq ZRS 6060, Инструкция по эксплуатации

Страница: 35 / 68

Page 35
After the picture has been accepted, the camera symbol is
active . From now on the same picture will be stored
with every measurement until the camera symbol will be
deactivated.
If measurements with new picture are required, repeat the
process. Measurements with pictures can be seen in the
archive. Please refer to chapter 11
“Archive” as from page
39.
10.4 WAAS GPS-unit
The ZRS 6060 offers the possibility to store the GPS-coordinates of a
measurement. If the ZRS 6060 is equipped with WAAS GPS-unit and is
switched on, there will be a GPS status indication beside the battery status
indication.
GPS status indication on the display
No GPS Signal
The WAAS GPS-unit is not able to receive a
positioning signal. The coordinates cannot be
displayed.
Weak GPS Signal
The WAAS GPS-unit is receiving the positioning
signal. The quality of the GPS signal is poor.
Normal
GPS Signal The WAAS GPS-unit is receiving the positioning
signal. The quality of the signal is fine.
Intense
GPS Signal The WAAS GPS-unit is receiving the positioning
signal. The signal quality is very good.
The quality of the GPS Signal basically indicates how many satellites are used to
determine the position of the ZRS 6060. Better signal quality means more precision
of the coordinates.
The GPS status indication is related to the HDOP (Horizontal Dilution of Precision).
This provides information about the quality of the received GPS data.