Proceq ZRS 6060, Инструкция по эксплуатации

Страница: 27 / 68

Page 27
Tap on the symbols and , then select
“measuring mode” to activate the „pass/fail“ function.
Minimum requirements for the retroreflective material to
be measured can be defined for each observation angle
by setting a lower reference value. If the minimum
requirements are fulfilled (pass
)
, the measuring values
appear in green. Should the measured value not reach
the minimum requirements (fail), the measured values
are displayed in red.
8.7 Interval timer measurements
Tap on the symbols and , then select
„Timers“
a
nd „Interval timer“ to activate interval timer
measurements.
With this function continuous measurements will be
taken.