Proceq ZRS 6060, Инструкция по эксплуатации

Страница: 22 / 68

Page 22
Here you can see and change the calibration setup
settings of the chosen observation angle.
Tap on the
row „Calibrate on“ to select the standard onto
which the chosen observation angle will be calibrated.
Tap the corresponding row to select the second
calibration standard.
In the default settings the second calibration standard is
called „Metas”.
The selected calibration standard is indicated by .
After the second calibration standard has been selected,
the „calibration settings“ of the chosen observation angle
will be displayed automatically. The standard value and
name can be set here by tapping on the corresponding
row.