Proceq ZRS 6060, Инструкция по эксплуатации

Страница: 57 / 68

Page 57
To charge the battery, plug the charger plug into
the socket on the ZRS 6060 and connect the
charger to a wall socket (100
– 240 V, 50 - 60 Hz).
The special plug on the charger has a reverse
polarity protection. The unit can be used and turned
off or on while charging.
For disconnecting the charger press on the “push
button” on the plug of the battery charger.
the battery should always be charged
completely and only with the supplied charger.
The battery may only be replaced by Proceq or by an authorized Proceq
agent.
If the unit hasn´t been used for a longer period of time, e.g. several months, it
should be charged before using.
15 Status and error messages
15.1 General
If an error message appears on the display, press on the warning
triangle to get a more detailed explanation of the error. The error
message disappears if you press “acknowledge”.
15.2
Status message “Battery voltage is critical”
For detailed information please refer to chapter 14
„Built-in battery and charging“ on
page 56.
15.3
Status message “Please calibrate 0.2°”
Press the warning triangle for detailed information.