Proceq ZRS 6060, Инструкция по эксплуатации

Страница: 17 / 68

Page 17
5 Setting up
Press the on/off button shortly to switch on the unit.
Older ZRS 6060 versions can be put into stand-by mode. This enables a fast
switch-on in a few seconds. To switch the unit into stand-by-mode, press the on/off
button shortly.
If the battery was completely empty or the unit was not used for a longer period, it
takes about 30 seconds to boot up, as the ZRS 6060 was shut off completely. To
shut off the unit completely, press the on/off button for at least 8 seconds.
Press the measuring button continuously during switch-on to get directly to the
language settings.
The
„auto off time“ and in case of older units the „auto sleep time“ can be set in the
menu, see chapter 13.6.4
“Power” on page 51.
6 Navigation
6.1 Activation / Deactivation
Certain functions can be activated / deactivated by tipping on the corresponding
icon on the display.
This is either shown with a white tick on green background for active functions, a
green tick for chosen menu options, a yellow highlight e.g. for active control
elements or a grey highlight e.g. for chosen measurements.
6.2 Scrolling
For scrolling use either the navigation arrows and or your fingers by
pressing and pulling into the desired direction.
6.3 Exit
The measuring mode can be opened by triggering the measuring button from every
function.
The only exceptions are functions with a “cancel” button
. These
have to be interrupted first by pressing the button. In certain functions there
is a backwards arrow to get back a level.