Proceq ZRS 6060, Инструкция по эксплуатации

Страница: 26 / 68

Page 26
In the main view, the measurement values will be
shown next to each observation angle after a
successful reading.
To edit or delete a measurement, refer to chapter 8.8
“Edit, delete and store measurements” on page 28.
Using the default settings, the measuring values appear
in white.
If the „pass/fail“ mode is activated, the
measuring values will appear in green or in red. Refer
to chapter 8.6
“Pass/Fail measurements” on page 26.
To change the settings of the measuring mode, refer to
chapter 13.2
“Navigation in the menu” on page 47.
Tap on the symbol for an enlarged view.
Tap on the symbol for an overview of the last measurements.
8.5 Average measurements
To trigger average measurements, the symbol on the display has to be
activated.
Press the measuring button (2) to trigger a measurement. The measuring period
takes about 2-3 seconds.
The last single values are displayed in the left column
and are numbered in the header. The current average
value is displayed on the right and the number of single
measurements is displayed in the header of the column.
To edit or delete a measurement, refer to chapter 8.8
“Edit, delete and store measurements” on page 28.
Using the default settings, the measuring values appear
in white. If the „pass/fail“ mode is activated, the
measuring values will appear in green or in red. Refer
to chapter 8.6
“Pass/Fail measurements” on page 26.
To change the settings of the measure mode, refer to
chapter 13.2
“Navigation in the menu” on page 47.
Tap on the symbol for an enlarged view.
Tap on the symbol for an overview of the last measurements.
8.6 Pass/Fail measurements