Proceq ZRS 6060, Инструкция по эксплуатации

Страница: 40 / 68

Page 40
11.2 Overview measurements (sorted)
The first column shows the observation angles and the
second column the respective measuring values. The
colour of the retroreflective material, date, time, and in the
case of average measurements the number of single
measurements e.g. (5), as well as the job are listed in the
third column. Press on a row to get additional information
on the entry.
You get a list of all measurements stored under the job
“Default” if you have chosen at the sorting of
measurements “by job” and afterwards the job “Default”. If
you press the button “Delete all in list” in this selection
every single measurement stored under the job “Default”
will be deleted at once.
Here you can delete single entries or open the quick entry
information
by pressing on the button “More”. Further
details will be displayed and additional information can be
added here.
Fehler! Textmarke nicht definiert.
11.3 Detailed entry information
In a measurement entry you first find the measuring
values, the date / time and on which standard the
instrument has been calibrated.
Furthermore, additional information such as temperature
and humidity is available. If the instrument is equipped
with the respective options additional information will be
displayed e.g. the GPS-coordinates.
“On Standard: True” means that the measurement has
been conducted while the front plate with calibration
standard was mounted in calibration position. Such a
measurement must not be used for the evaluation of a
retroreflective material.
11.4 Input of additional information