Page 28
As neither a project nor a measuring file have been opened yet, no data will be
stored on the tablet and only a limited number of features are displayed in the
measuring window. For a detailed explanation of all available features in the
measuring window, please see below.
This mode is used for control measurements or comparisons with a handheld
device.
The full range of features is displayed in the measuring window only when a project
and a measuring file have been opened or created; please refer to chapter 5.5
“Project” as from page 29. This enables the system to record and store the
measured data in a measuring file on the tablet.
The measuring window is divided into different sections:
1. Bar diagram
2. Measuring buttons
3. Time diagram
4. Signal quality
5. R
L
-values
6. Event buttons
7. Parameters