Page 35
5.6.2 Speed calibration
The ZDR 6020 takes the speed information from an adapter connected to the
internal car communication system (CAN bus). The extracted signal is proportional
to the vehicle speed and needs to be calibrated for proper mileage calculation.
Click on “Calibrate – Setup – Speed Calibration” in the main menu to open the
speed calibration window:
The button is disabled if the measuring head is not connected to the system.
New Calib:
New speed calibration
Recalibrate:
Recalibrate existing speed calibration
Apply:
Activate current speed calibration from list
Remove:
Remove highlighted speed calibration
Back arrow:
Close the speed calibration dialog
For detailed explanation on how to do the speed calibration, see chapter 7
