Page 62
Place both hands on each side of the
measuring head as shown in the picture. The
thumb against the edge of the mounting bracket
and all other fingers against the small edge of
the back plate.
Press on both sides simultaneously.
Press with the thumb forward against the
mounting bracket and pull back the back plate
with all other fingers. The measuring head
should now begin to slide out of the housing
gradually.
Alternative solution
: If the head doesn’t slide
out easily, try the following:
Screw the M4 screw from the storage box into
the centre hole as much as possible. Take a
rubber mallet or similar and hit the screw
gently. The measuring head should now begin
to slide out of the housing gradually
Gently slide the measuring head out of its
housing. Note: Do not pull the main cable.
Lay down the measuring head, facing the left
side to the top.
