Page 42
Filter Settings:
Data filter needed to calculate R
L
Live Data Monitor:
Internal use only
DB Data Monitor:
Internal use only
Msre & RT Monitor:
Important system parameters like lamp voltage
Connection Monitor:
Information about TCP parameters and active
connection.
Calibration Monitor:
Calibration parameters, internal use only
GPS Monitor:
GPS, temperature and humidity
State Machine:
Internal use only
Filter Settings
Before an R
L
value is calculated and displayed, the measured raw data need to
pass several filter and validation checks. Click on the “Filter Settings“ tab in the
system configuration window:
Be aware that wrong filter settings may result in erroneous measurements.
The default values should not be changed.
