Printronix Network Interface Card, Руководство пользователя

Страница: 333 / 378

Set Commands
333
set sysinfo syslog hostIPaddress
Example:
set sysinfo syslog 192.75.11.30
Set the IP address of the host running the SYSLOG daemon.
NIC debugging or print job and printer logging information can
be sent to that IP address.
set sysinfo dns <IPaddress>
Example:
set sysinfo dns 192.75.11.2
Set your DNS server IP address so the NIC can resolve host
names when used with its built-in
Telnet
and
ping
clients.
set sysinfo domain <name>
Example:
set sysinfo domain printronix.com
Sets the domain name for the NIC, which when combined with
the print server name, forms the fully qualified domain name of
the NIC.
set sysinfo descramblekey <hexval>
Example:
set sysinfo descramblekey 1234
Set the key value used for descrambling print jobs that have
passed through Printronix npscramble utility on a TCP/IP host.
This key is a four-digit hexadecimal value obtained from the
host software, npscramble. Within the npscramble source
code, there is a variable called SR_KEY which contains the
default key value. This can be changed to any four-digit value
you would like.
set sysinfo module [[-]novell] [[-]netbios]
Example:
set sysinfo module -novell
Enable and disable certain network protocol stacks within the
NIC. Sometimes it helps to disable any protocols you are not
using on your network.
NOTE: [ - ] novell option is not available on the Integrated NIC.
set user add|del <name>
Example:
set user add eng
Add or remove a user on the NIC defined by
<name>
.
IMPORTANT
Do not delete the root user, or you will be unable to configure
any further settings on the print server. You will have to go
back to factory defaults to correct this problem.